Why you can not use your phone while standing watch in the military Essay

Why you can not use your phone while standing watch in the military (navy) - Essay Example Mobile phones are huge distractors in the current society and there are many accidents that have been triggered by careless use of the mobile phones. Regardless of the type of watch, watch stander must devote full attention to it because the watcher helps in keeping the ship running smoothly. Moreover, maintaining a watch is essential in ensuring quality communication, security, and safety, elements that do not require any form of attention. Military requires high quality discipline is paramount because failure to abide by laws put in place may cause serious danger to the health of others or even risk in facilities. Watches such as security watches are supposed to prevent sabotage, protect property from damage and prevent access to restricted areas or even protect personnel, all these cannot be carried out successfully in case of any distraction by mobile phones. Mobile phones may lead to divided attention or even make an individual forget the duties to be carried out. Duties assigned to security watches do not require any form of distraction that mobile phones are associated with. Using mobile phone makes it difficult to maintai n continuous patrols above and below decks and reduces alertness for evidence of sabotage, thievery, and fire hazards. Additionally, use of mobile phone interferes with attention required in checking security of weapons, obtaining periodic sounding of designated tanks and inspecting damage control closures. Security watch is crucial in barracks in protecting it against fire, for safety of personnel and property as well as carrying out routines, all these requires security watch to be responsible for understanding and carrying out provisions of the fire bill and emergency bill. A security watch stander has essential responsibility of maintaining prescribed standards of order and discipline and therefore use of mobile phone

FAULT DIAGNOSIS OF AC High Voltages UNDERGROUND CABLES AND SOLUTIONS Research Paper

FAULT DIAGNOSIS OF AC High Voltages UNDERGROUND CABLES AND SOLUTIONS ANALYSIS TECHNIQUES - Research Paper Example I also looked at the formation of water trees in the plastic insulation and how both mechanical and chemical forces trigger them. Besides, charges can also lead to the formation of water trees. After a thorough analysis of fault detection techniques, I settled on two of them. They first one is the magnetic amorphous magneto†resistive concentric†neutral probing. The next method is the radio frequency test† point injection. The magnetic technique can detect a fault from an average distance of 90 feet. Underground cables have been in use for a long time in power distribution networks due to the advantages associated with underground connections. These cables are friendly to the environment, are not interrupted by adverse weather conditions, are less expensive for shorter distances and have got low maintenance costs. The disadvantages of these cables are that they are more expensive than overhead lines, have low power transferring capacity, are likely to get permanently damaged and fault location in underground cables is also difficult. Faults in underground cables are divided into two general groups that are permanent and incipient faults. Incipient faults develop from aging of insulation material that can be caused by chemical pollution, electrical overstress, severe environmental conditions and mechanical factors. Incipient faults gradually turn into permanent faults. Fault location is important in ensuring that distribution networks remain reliable as the restoration will be quick, so that power outage time is reduced. The cost of repair will also be low if a fault is located and corrected promptly. This research majorly studies how faults can be diagnosed in AC high voltage underground cables and the possible solution techniques for the faults. Some objectives must be achieved to realize this goal. The first objective is to establish the distinction between underground

What Causes Market Inefficiency Assignment Example | Topics and Well Written Essays - 250 words

What Causes Market Inefficiency - Assignment Example The following situation may lead the market mechanism in not leading to the most efficient output and market will fail. These situations can be classified under the following head: The examples of externalities are, suppose that a person is suffering from a contagious disease. He considers that by going to a doctor, his costs will be the fees paid to doctor and benefits will be the cure of the disease. However, he will not take into account the fact that if he does not go to the doctor, other people might catch the same disease. This will result in less-urgency for him to go to the doctor. This shows how ignorance of negative externalities can lead to over production or irrational response. Now, let’s look at the example of negative externality in the context of a business or economic decision. Suppose you want to buy a car. The main consideration for the purchase will be the cost of the car and possible benefits attained from the car. However, market mechanism will ignore the impact of car purchase on the environment and other parties such as pollution, road congestion and accidents. This ignorance may tempt you into purchasing the good and hence there will be an over-production of good due to negative

Islamic Banking and finance Essay Example | Topics and Well Written Essays - 4500 words

Islamic Banking and finance - Essay Example t, lack of technological support and sophistication for dealing with long drawn projects and existence of information asymmetry in relation to unique products offered by Islamic banks (Abduh and Omah, 2012). The paper is aimed at a detailed discussion of Islamic Banking development and foundations that lay the basis for their banking system. The paper attempts to understand critical aspects of the Islamic banking system and one of its critical schemes of profit and loss sharing mechanism within their lending process. Through an understanding of the PLS structure, the paper comprehends reasons for its unpopularity and reduced acceptance over other modes of finance, despite its evident advantages. The identification of problems also brings forth solution to problems associated with PLS finance. The paper makes recommendations to improve and revive the PLS finance based on such comprehensive analysis. With independence of Muslim community, it has been increasingly felt that modern financial institutions need to come into the Islamic Banking system and run in compliance with the Islamic sensitivity. The first degree of concrete steps towards combining modern day finance with Islam was seen in Egypt through Mit Ghamur project of savings in 1963 (Al-Alwani and El-Ansary, 1998). This project refrained from calling themselves to be Islamic in nature, yet there was an inherent culture of providing financial intermediation, as per teachings of the Islamic community. Dubai Islamic Bank was the first of its kind in commercial modern Islamic Banking and was founded in 1975 (Thomas, 2006). Out of a total of 176 Islamic banks as of 2006 that have been registered with Bankscope, 70% have been reported to be concentrated in Middle East. The remaining is split between South East Asia with 17% and Sub-Saharan Africa with 15% (Al-Hejailan, 2000). The report by Alvi (2010) also states that develop ment of organizational structures towards more sophisticated financial instruments like,

Financial Analysis of Mitsui & CO Essay Example | Topics and Well Written Essays - 750 words

Financial Analysis of Mitsui & CO - Essay Example The company seems to be well managed. The profitability assessments are mostly positive, the liquidity position of the company is also steady and the operational efficiency is also relatively good. But the capital structure shows weaknesses. The company needs to reduce its leverage for it to be viable in the longrun. The ratings provided by the above organizations show that the company is well trusted in the market and shows strength. Appendix 1. Return on Investment (ROI) = {Profit before interest and tax (PBIT) / Investment (total assets - current liabilities)} 2007: (2798 / 50,874) x 100; 2006: (2164 / 43270) x 100 2. Gross Profit Ratio = (Gross Profit) / Revenue 2007: (2798 / 41,363) x 100; 2006: (2164 / 29741) x 100 3. Return on Equity (ROE) = {Profit after interest and tax / Equity }x 100 2007: (1347 / 17,884) x 100; 2006: (1066 / 14,341) x 100 4. Earnings per share (given as income per share) 5. Working Capital = Current assets - Current liabilities 2007: (42,998 - 32,290) ; 2006: (40,571 - 30,008) 6. Current Ratio = Current assets : Current liabilities 2007: ((42,998 / 32,290) ; 2006: (40,571 / 30,008) 7. Acid Test (or Quick) Ratio = Quick Assets : Current liabilities (Quick assets = current assets - stocks) 2007: (42,998 - 2155) / 32,290 ; 2006: (40,571 - 2736) / 30,008 8. Total Asset Turnover = Revenue / Total assets (fixed + current) (times) 2007: (41,363 / 83,164) ; 2006: (35,175 / 73,278) 9. Fixed Asset Turnover = Revenue / Fixed Assets (times) 2007: (41,363 / 8365) ; 2006: (35,175 / 6378) 10. Cash Turnover Ratio = Revenue / Average Cash Balances (times) 2007: {41,363 / [(6780 + 5958)/ 2] }; 2006: {35,175 / [(5958 + 7400) / 2]} 11. Gearing ratio = {Total debt capital / (Total debt capital + Equity funds) }x 100 2007: {(5583 + 3151) / [5583 + 3151 + 17,884] ] x 100; 2006: {(4622 + 3019) / [4622 + 3019 + 14,341] } x 100 12. Debt-Equity ratio = (Debt capital / Equity capital ) x 100 2007: {(5583 + 3151) / 17,884 }x 100; 2006: {(4622 + 3019) / 14,341} x 100 13. Debt Ratio = (Total Debt Finance / Total Assets) x100 2007: {(5583 + 3151) / 83,164}x 100; 2006: {(4622 + 3019) / 73,278}x 100 References Annual Report 2007: Mitsui & Co, Ltd. [Online]www.mitsui.co.jp. Annual Report 2006: Mitsui & Co, Ltd. [Online]www.mitsui.co.jp. Annual Report 2005: Mitsui & Co, Ltd. [Online]www.mitsui.co.jp. Annual Report 2004: Mitsui & Co, Ltd. [Online]www.mitsui.co.jp. "Financial Information: Credit Ratings." www.mitsui.co.jp. "Mitsui &

Geological map interpretation Research Paper Example | Topics and Well Written Essays - 750 words

Geological map interpretation - Research Paper Example Through history, the study of geographical and geological formation of the island defines most parts of Nova Scotia. The following paper expound on the rock formation, geological processes and interesting features that form the island. The analysis is based on geological maps and photographic maps of West Ironbound Island. The rock formation of the island depended on the features that are present. From the photographic maps of the shores of West Ironbound Island, Halifax Group of rocks are defined. They interact with the upper larger group of Meguma rocks and divide into two major groups. These groups are Meguma Terrane and Avalon Terrane. The groups represent major continents that have been joined to form one large land mass. The Halifax group of rock bed is approximately 3600 meters deep. This layer overlay the Meguma Super group of rock. Turbidite rocks and metamorphosed rocks characterize the northern part of the island. Across the island, there are sedimentary rocks or metasedim ents with its thickness ranging between 5cm and 8 cm. There are lithogies on the Halifax slate across the West Ironbound Island. These lithories are oval in shape and appear as structures deformed during the Carboniferous period. They have a thickness of 0.35 meters and a length of 0.75 meters. On the photographic maps, they are seen as circular moldings of layers of rocks. Multiple faulting and colliding of various continents is associated with West Ironbound Island. Various plates are noted colliding and crushing over each other. On the shores of the island, folding of Meguma Super group of rocks is seen. The alignment of the folds shows where the force of folding originated. These folds present beautiful scenery and view from the adjacent land of Simpson. The deformations which occurred as glaciations, folding and faulting are associated with Acadian Orogenic compression events. The cleavages that appear in all localities dip with a 70 degrees to the south east of the island. The degree of dipping is evenly distributed in the whole of the island where cleavage is noted. This means that the compression force in Acadian Orogenic period was also evenly distributed. On the geographical map, West Ironbound Island is located in the middle of the anticline. It falls within the Hinge line of the Anticline. West Ironbound Island is endowed with mineral deposits that have not been exploited. Igneous intrusions are evidence of low profile eruptions along the Meguma Super group layer. These intrusions leave deposits of quartz. Due to deformation in Acadian Orogeny era, cracks and fissures formed and accommodated quartz deposits. Quartz deposits are a source of iron and gold in some parts of the island. These have been confirmed by geologists working on the vas Nova Scotia area. Asenopyrite is also associated with the area of the island. The exposed Halifax group of rocks on the island is composed of metalliferous hydrothermal stretch of quartz on the northern end. This stretch is not rich in gold but only iron pyrites. Glaciations’ is evident in the geological maps studied. The marine time province was covered with thick layers of ice in the last glacial period. The current shape of the marine time area was molded by the glacier. Lose layers of rocks were eroded leaving behind a well polished top cover. This took place in the times of Mesozoic era. Glacial Till Drumlin is shown on different photographic maps in

Social Responsibility of a Business Essay Example | Topics and Well Written Essays - 2500 words

Social Responsibility of a Business - Essay Example Quite often, businessmen can be found expressing their concerns upon the social responsibilities of business. In the modern age, people have become extremely conscious about the issues of health and safety, and sustainability. Having sufficiently achieved the necessities of life, people, organizations, and agencies all are now heading towards achieving psychological contentment. That is why, issues like sustainable development have become a major concern in the contemporary age unlike past, when bringing the industrial revolution was more important that keeping environment healthy with a compromise upon development of technology. As businesses are the key drivers of economy and the practices adopted by business entrepreneurs play a decisive role in the maintenance of health and safety of the environment, a lot of debate has conventionally occurred regarding the relationship between business and society. This gave rise to the concept of corporate social responsibility (CSR). CSR had e volved as a concept to define the link between business and society (Klonoski, 1991 cited in Shah and Chen, 2010, p. 118). One of the leading scholars who have conventionally participated heavily in the debate of relationship between business and society is Carroll (1979) who defined the corporate social responsibility in these words, â€Å"The social responsibility of business encompasses the economic, legal, ethical, and discretionary expectations that society has of organizations at a given point of time† (Carroll, 1979, p. 500). There are six basic responsibilities of the CSR as indicated in the figure below: Responsibilities of CSR (Rotariu and Ilies, 2011, p. 13). Another useful and well constructed definition of CSR is that it is â€Å"a prominent feature of the business and society literature, addressing topics of business ethics, corporate social performance, global corporate citizenship, and stakeholder management† (D’Amato, Henderson, and Florence, 20 09, p. 2). In addition to CSR, another term that has been coined some time ago and that also explains the public concerns with business is public relations (PR). A comprehensive definition of public relations is; â€Å"PR practice is the art and social science of analyzing trends, predicting their consequences, counseling organizational leaders, and implementing planned programs of action which will serve both organization and public interest† (Wilcox et al. 2003 cited in Sinh, 2007). According to Grunig (2006 cited in Jones and Bartlett, 2009, p, 1), the biggest difficulty practitioners of public relations encounter is the enrollment of public relations in the business practices as an acknowledged management function. The social dimension of a business: Business in society exists because of Social Will. Society permits business to extract the resources that nature has given it since time immemorial, to market products and to provide necessary services to its members with the least side-effects on existing morality, social relationships, and the environment. (Alweiss, 2009). Social conscience of the business requires the entrepreneurs to provide the public with job opportunities, eradicate discrimination from the workplace on the basis of race, gender, religion and culture etc, and adopt such business practices that make it green, environment friendly and sustainable.